Search results for "Proton exchange membrane"
showing 10 items of 60 documents
Optimization of the enzyme power source for a nano drug delivery system fuelled by glucose in blood plasma
2019
A unique in vivo electrical pulse generator to improve membrane permeability for drugs and simultaneously facilitate self-powered nano devices for nano drug delivery systems (NDDS) was identified. The use of an unsupported biological catalyst component of the power supply was aimed at the NDDS instead of a conventional membrane electrode assembly (MEA). Self-powered carriers of drugs and prodrugs with improved controlled release capability to target areas using substrate available in biological matrices such as glucose in blood is envisaged. The experimental application implemented prototype designed chambers allowing the entry of premixed precursors and low ohm resistance due the absence o…
Effect of TiO2 and Al2O3 Addition on the Performance of Chitosan/Phosphotungstic Composite Membranes for Direct Methanol Fuel Cells
2023
Composite chitosan/phosphotungstic acid (CS/PTA) with the addition of TiO2 and Al2O3 particles were synthesized to be used as proton exchange membranes in direct methanol fuel cells (DMFCs). The influence of fillers was assessed through X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, liquid uptake, ion exchange capacity and methanol permeability measurements. The addition of TiO2 particles into proton exchange membranes led to an increase in crystallinity and a decrease in liquid uptake and methanol permeability with respect to pristine CS/PTA membranes, whilst the effect of the introduction of Al2O3 particles on the characteristics of membranes is almost the op…
Experimental characterization of a proton exchange membrane fuel-cell for hybrid electric pedal assisted cycles
2017
This paper presents a feasibility study on the prototyping of a hybrid EPAC (Electric Pedal Assisted Cycle) through an FC-B-UC (Fuel Cell — Battery — Ultra-Capacitors) power system. Aim of this work is the characterization of a PEMFC (Proton Exchange Membrane Fuel Cell) in order to confirm its theoretical performances and to verify the possibility of its installation on an e-bike.
A steady state and dynamic fuel cell model including temperature effects
2009
In the last few years fuel cells have attracted much interest from both academic and industrial researchers to replace current lithium-ion and similar rechargeable battery systems. A wide variety of research areas benefit from fuel cell use: electro-chemical, stationary, transportation and portable electronics can be cited as an example. Potential applications range from few watts to megawatts systems. Even concerning quite different scientific areas, fuel cell modelling is a common requirement. The complexity of such a topic relies not only on the modelling approach but also in the model structure and implementation. In this paper a steady state and dynamic fuel cell circuital model includ…
Pt–CeO thin film catalysts for PEMFC
2015
Abstract Platinum is the mostly used element in catalysts for fuel cell technology, but its high price limits large-scale applications. Platinum doped cerium oxide represents an alternative solution due to very low loading, typically few micrograms per 1 cm2, at the proton exchange membrane fuel cell (PEMFC) anode. High efficiency is achieved by using magnetron sputtering deposition of cerium oxide and Pt of 30 nm thick nanoporous films on large surface carbon nanoparticle substrates. Thin film techniques permits to grow the catalyst film characterized by highly dispersed platinum, mostly in ionic Pt2+ state. Such dispersed Pt species show high activity and stability. These new materials ma…
Proton exchange membrane fuel cell made of magnetron sputtered Pt–CeO and Pt–Co thin film catalysts
2015
Abstract Preparation of catalysts for proton exchange membrane fuel cells (PEMFCs) is of growing interest during last years. The magnetron sputtering technique is a promising method of catalyst preparation because it permits to synthesize catalysts in a fast and relatively less expensive way, however control of specific surface and durability of such catalysts still remains the main concern. We tested a single cell PEMFC catalyzed by using exclusively thin film approach by combining state-of-the art Pt-doped cerium oxide anode and a new Pt–Co alloy cathode. We have shown that beside very high mass activity of the catalysts relative to the membrane electrode assembly the catalyst nanoporous …
High efficiency of Pt2+ - CeO2 novel thin film catalyst as anode for proton exchange membrane fuel cells
2016
Abstract The elevated price of Pt limits the large-scale implementation of commercial proton exchange membrane fuel cells, which effectively convert chemical energy into electricity. In order to increase the cost-efficiency in proton-exchange membrane fuel cells, we have designed a family of novel anode catalysts consisting of thin films of ceria with low Pt loadings sputtered on a nanostructured carbon support. Remarkably, only such small amounts of Pt are necessary for achieving power density values comparable to the reference commercial catalysts, which results in excellent specific activities of our samples. By combining photoelectron spectroscopy and catalytic performance analysis, we …
A stacked interleaved DC-DC buck converter for proton exchange membrane electrolyzer applications: Design and experimental validation
2019
Abstract Since the two last decades, hydrogen production has been attracting the attention of the scientific community thanks to its inherent very low pollution when energy coming from renewable energy sources (RESs) are used. However, it implies the use of DC/DC converters to interface source and load. These conversion systems must meet several requirements from current ripple point of view, energy efficiency, and performance to preserve the sustainability of hydrogen production. This article proposes the design and realization of a stacked interleaved buck converter to supply a proton exchange membrane electrolyzer. The converter is designed to ensure a low output current ripple and a sui…
A comparative evaluation of palladium and platinum nanoparticles as catalysts in proton exchange membrane electrochemical cells
2008
The goal of the present study is the development and comparative characterisation of carbon-supported and nanostructured Pd- and Pt-based electrocatalysts for hydrogen oxidation in Proton Exchange Membrane (PEM) H2/O2(air) fuel cells and proton reduction in PEM water electrolysers. Catalysts have been synthesised in a solution using a combined impregnation/reduction polyol method. They have been characterised using X-ray Diffraction (XRD) analysis, Transmission Electron Microscopy (TEM), Thermogravimetric Analysis (TGA) and cyclic voltammetry. NanoPt, nanoPd and nanoPt-Pd catalysts deposited onto a carbon carrier have been used to prepare Membrane-Electrode Assemblies (MEAs) which, in turn,…
Experimental analysis of materials in proton exchange membrane electrolysis cells
2019
Abstract An accelerated supply and demand of energy has resulted in an increased need for efficient energy storage options, where storing energy in hydrogen gas emerges as one of the most attractive. In this study, a singular proton exchange membrane (PEM) electrolysis cell was designed using adequately low-cost materials, and tested using polarisation curves, cyclic voltammetry and AC impedance. A comparative study of various micro porous layer (MPL) materials was performed in an effort to find suitable options which are able to steadily operate under anodic conditions. The best performance was achieved using carbon cloth, however this material was unstable. Untreated porous titanium and n…